In many locations from chemistry laboratories to industrial amenities, to be able to ensure the safety of life and property against a potential hearth hazard, extinguishing systems are used in addition to detection and alarm methods. It can be extremely necessary that the extinguishing techniques put in can be triggered by the fire extinguishing management panel, to find a way to eliminate a potential hearth with early intervention.
In order to meet these needs, and with 35 years of sectoral information and expertise, Mavili Elektronik presents:
Maxlogic Conventional Fire Extinguishing Control Panel operating according to the cross-zone detection precept;
Maxlogic Extinguishing Status Indicator Unit, which allows the distant efficiency of the indicators and controls on the Control Panel;
Maxlogic Extinguishing Output Expansion Panel;
Maxlogic Extinguishant Manual Release Button, which allows the extinguishing process to be began manually and remotely; and
to make sure that the extinguishing process can be paused, Maxlogic has produced the Extinguishant Emergency Stop Button.
All these devices are produced using surface-mount expertise and are aimed at making the automation of the extinguishing system and fire and gas detection system good.
Image copyright: Mavili
Mavili Elektronik develops its products by always contemplating the needs of the set up. In circumstances that require the mixing of the extinguishing system with the clever addressable fire detection system, it offers solutions via the monitoring modules that even have a ‘supervised’ option.
Supervised monitoring pressure gauge 4 นิ้ว play an important function in controlling the continuity of the cable connection between the loop and the extinguishing system. Failure to detect a possible open or short circuit in the wiring between the contact monitoring modules and the peripheral systems could cause disruption of the triggering, with doubtlessly crucial consequences. For this cause, when choosing monitoring modules, it ought to be taken into consideration that they have supervised features.
Image copyright: Mavili
Since Maxlogic clever addressable fireplace detection and alarm control panels are continually speaking with ‘supervise’ contact monitoring modules connected to cable loops and compliant with EN 54-17 and EN 54-18 requirements, it makes it simpler to monitor conditions corresponding to open circuits and quick circuits that will occur within the system. Many duties may be carried out within the hearth extinguishing set up, such because the management and monitoring of all valves that may interrupt the flow of water, water flow alarm switches, stress switch, and electric or diesel fireplace pumps.
By including two contact monitoring modules to 2 separate relay outputs located above the Maxlogic Conventional Fire Extinguishing Control Panel, one of the modules can be used to regulate errors and the opposite to control the fireplace state of affairs, monitoring and management of the extinguishing system by way of an clever addressable fire detection and alarm system may be performed successfully.
For extra info, go to www.mavili.com.tr/en
Share