On-site calibration of measuring instruments is often very time-consuming and expensive. This is also true for applications with several measurands. One of these of this is the metering skid, something for the custody transfer measurement of the quantity of natural gas transferred. A worldwide player in the market from Saudi Arabia has now significantly streamlined the testing process at this stage: with the multi-functional CPH8000-P1 calibrator from WIKA, a ?calibration laboratory in an incident?.
The center of a metering skid may be the flow computer. It processes the info from all the measuring instruments and calculates the exact amount of gas that flows to the client. Natural gas is compressible, therefore the tabs on pressure and temperature during gas transfer plays an essential role.
Verification is the law
Because even small measuring errors can cause noticeable losses in turnover, the measuring instruments should be calibrated regularly. This is usually done at the facility. Each on-site calibration must be verified in accordance with regulations. This implies proving consistent repeatability of the test results and traceability to the assigned references. In addition, the regulations require the test equipment to be approved for use in hazardous areas.
In view of certain requirements, the calibration personnel of WIKA customers previously had to utilize many different devices so that you can adequately fulfil their tasks. As well as pressure and temperature calibrators, this included a pneumatic pump for the test pressure, a HART� communicator and a resistance decoder. The on-site calibration cost time and effort accordingly.
The CPH8000-P1 multi-functional calibrator significantly reduces the effort necessary for on-site calibration.
Four measuring channels
The gas company in Saudi Arabia has reduced this effort in a single fell swoop with the CPH8000-P1 portable multi-function calibrator from WIKA. The case-mounted instrument calibrates pressure measuring instruments together with resistance thermometers and thermocouples. The test pressure is generated with an integrated pump. The CPH8000-P1 has four measuring channels. It could thus perform and display up to four measurements simultaneously. The ATEX-approved version also supplies the test items and reference sensors in the metering skid with voltage (DC 24 V) without danger.
Documentation without problems
During the test procedure, the CPH8000-P1 ? via its integrated HART� module ? Steady with the measuring instruments, which are also HART�-capable. Its powerful data logger and the large memory capacity support an individual in the next documentation of the on-site calibration. The unit provides all the details relevant for verification.
Note
Detailed home elevators the model CPH8000 multi-function calibrators can be acquired on the WIKA website. Each instrument includes a modular design and will therefore be specified for the respective range of applications. Should you have any further questions, your contact will gladly help you.g